Jumpking OR1413B6A1, User Manual

Page: 17 / 24

17
4
4. Lay the Frame Pad (8) on the frame.
Do not use the trampoline without the
Frame Pad (8)
, which is designed to reduce the
likelihood of injury to the user from coming in con-
tact with the trampoline frame. If you do not
have a Frame Pad, call our Customer Hot Line
toll-free at 1-877-927-8777, Monday-Friday,8 a.m.
-5 p.m. Central Time.(Excluding Holidays)
Properly install the Frame Pad before using the
trampoline.
Thread one end of Elastic Tie-Down, then tie a knot
on V-Ring.
Repeat this step with the remaining straps which at
middle position of each pad section (not shown).
Elastic Tie-Down
Spring
V-Ring
V-Ring
5
A
B
C
Frame Pad
Frame Pad
Frame Pad
Top tube
Top tube
Top tube
Webbing
Webbing
Webbing
D-ring D-ring
D-ring
Look under the trampoline and locate the pairs
of straps near the edge of bed(7) and Double
D-ring and webbing near the frame.
See the inset drawing. A, B and C. Repeat this
step with the remaining straps (not shown).
5.
Elastic Tie-Down
Strap with Double D-ring on the pad edge
Safety pad(8)
D-ring
T-connector
Webbing
Webbing
Double D-ring in the middle of pad should be
fixed exactly close to the right of T connector
on the top rail.
Double D-rings on the middle of pad should be fixed
exactly on the right of each T-connector of frame.
8