Part 16
Part 15
Swing Seat assembly
-
Using swing seat rail (Part 15), slowly insert it through any webbing on seat surface (Part 16), being
careful to insert it thoroughly through every webbing.
-
Continue looping the 3 remaining swing seat rails (Part 15) until they are looped within the webbing
-
Next, take the larger swedge on seat rail (Part 15) and connect it with the smaller swedge on the
next one, until all are connected, making a full connected circle frame.
- Insert the screw (Part 18) into the center hole of cover (Part 22).
-
Take ropes (Part 14) and loop it through screw set for swing seat toprail (Part 18) (4 Sets).
-
Take screw sets with ropes connected (Part 18) and insert them to the corresponding holes where
swing seat toprail (Part 15) align with each other, and screw them together using the provided Allen
Key.
- Close the cover (Part 22) by velcro tape.
-
Take each carabiner and attach it to the round ring (Pre-Assembled on rope).
15
Rope
Part 14
Part 22
Part 22
Part 22
Part 18
Insert the screw to the cover (Part 22).
Close the cover (part 22) by
velcro tape.
Rope
Part 14
Part 22
Step 5
