USING THE UNIT (JUMP STARTING, con5nued)
•
If you’ve made a mistake and set the jump starter to 12 Volts, and the
vehicle is 24 Volts, follow these steps:
–
Immediately move away from the JNC1224.
–
Disconnect from the vehicle’s baOery.
–
Allow the unit to vent for at least 30 minutes.
–
Disconnect the power selector plug.
–
Tag the unit out as non‐func,onal.
–
Return to Clore Automo,ve for baOery evalua,on.
•
If the vehicle has a 12 Volt system with dual baOeries, hook up the jump
starter to the baOery closest to the starter.
•
Posi,on jump starter cables to reduce risk of damage by hood, door or
moving engine parts.
SAFETY
