manualshive.com logo in svg

JUMO TDA-300, Operating Manual

Share
Download
JUMO TDA-300 Operating Manual Download Page 47

47

8 Configuration

This chapter deals with the possibilities provided by the configuration menu
“Setup (Fn9)”. From normal display, start the configuration menu as follows:

h

Press the MENU/POWER key until “Fn9” and “Setup” are displayed and 
then press the SET key.

You are now in the configuration menu and are able to set the parameters.
- UP or DOWN key 

( ,  ): 

alter selection.

- SET key: confirm selection and call the next parameter.
- ESC key: cancel selection and quit menu.

8.1 Language

Select the language in which you want to operate the instrument.

Select between: 

German, English and French

factory-set:

German

h

Press the UP ( ) or DOWN ( ) key to change between the  
languages.

h

Press the SET key to activate the selected language.

h

Press the ESC key twice to return to normal display.

8.2 Date format

Select the format in which to display the date.

Select between: 

month/day and day/month

factory-set:

day/month

h

Press the UP ( ) or DOWN ( ) key to change between the individual 
formats.

h

Press the SET key to activate the selected format.

h

Press the ESC key twice to return to normal display.

All manuals and user guides at all-guides.com

Summary of Contents for TDA-300





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands