JUMO flowTRANS MAG S01, Technical Data Manual

Page: 9 / 57

V1.00/EN/00643259
Page 9/57 Data Sheet 406012
JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: +49 661 6003-0
Fax: +49 661 6003-607
Email: mail@jumo.net
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: +44 1279 635533
Fax:
+44 1279 635262
Email: sales@jumo.co.uk
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
6733 Myers Road
East Syracuse, NY 13057, USA
Phone: 315-437-5866
1-800-554-5866
Fax: 315-437-5860
Email: info.us@jumo.net
Internet: www.jumousa.com
40601200T10Z001K000
Sensor
Temperatures
The temperature range of the device depends on various factors. These factors include the medium temperature, the ambient temperature, the
operating pressure, the lining material, and the approvals for the Ex-protection.
Storage temperature
-40 to +70 °C (-40 to +158 °F)
Minimum admissible pressure depending on the medium temperature
Sensor housing made of aluminum (shell housing)
Sensor housing made of steel
Maximum admissible cleaning temperature
If the ambient temperature is > 25 °C, the difference must be subtracted from the max. cleaning temperature. T
max
- ∆ °C.
( ∆ °C = T
Amb
- 25 °C)
Lining Nominal width p
operating
abs at T
operating
a
Hard rubber DN 15 to 300 (1/2 to 12 ″ ) 0 mbar < 90 °C (194 °F)
PTFE DN 10 to 300 (3/8 to 12 ″ )
270 mbar < 20 °C (68 °F)
400 mbar < 100 °C (212 °F)
500 mbar < 130 °C (266 °F)
a
Higher temperatures are admissible for CIP/SIP cleaning for a limited time (see table „Maximum admissible cleaning temperature “, page 9).
Lining Nominal width p
operating
abs at T
operating
a
Hard rubber DN 40 to 300 (1 1/2 to 12 ″ ) 600 mbar < 80 °C (176 °F)
PTFE DN 25 to 300 (1 to 12 ″ )
270 mbar < 20 °C (68 °F)
400 mbar < 100 °C (212 °F)
500 mbar < 130 °C (266 °F)
a
Higher temperatures are admissible for CIP/SIP cleaning for a limited time (see table „Maximum admissible cleaning temperature “, page 9).
CIP cleaning Lining T
max
T
max
minutes T
Amb
Sensor
Steam cleaning PTFE 150 °C (302 °F) 60 25 °C (77 °F)
Liquids PTFE 140 °C (284 °F) 60 25 °C (77 °F)