JUMO dTRANS pH 02, Operating Manual, Page: 28 / 136

6 Operation
28
6.4 Measuring mode
6.4.1 Normal display
Visualization
The following are displayed in measuring mode:
- Analog input signal
- Unit (for example pH)
- Temperature of the sample medium
Different display types can be configured, see "Display of measured values
STANDARD", page 111.
To return to measuring mode:
press the
key or wait for a "timeout".
Measurements with "out of range" are ignored.
The min./max. value memory can be reset:
Administrator level/Delete min/max.
When the basic setting is changed, the min and max values are deleted.
EXIT
(1) MEASURING -> Measuring mode
(2) 25.0 °C -> Temperature of the sample medium
(3) 7.70 pH -> Measurement value calculated from the standard signal at
the input
(3)
(1)
(2)