JUMO dTRANS p33, Operating Manual

Page: 68 / 136

4 Mounting
22
4.6 Assembly of the terminal box
Terminal box to DIN 43650, Form AF with Pg9 gland for cable diameters from 4.5 to 7 mm; maximum
conductor cross-section 1.5 mm
2
, IP65 protection to EN 60529
1. Unscrew the screw (C) to open the connector.
2. Using a small, flat screwdriver, lever out the inner part (A) from the outer part (B) (see marking on
the inner part).
NOTE!
The inner part can be fitted into the outer part in any of 4 positions, 90° apart.
(A) Inner part
(B) Outer part
(C) Screw
(
A
) (
B
) (C)