JUMO dTRANS p33, Operating Manual

Page: 63 / 136

17
4 Mounting
4.2.3 Terminal case with pressure compensation element
The terminal case, part no. 00061206, is used for secure installation of the level probe cable. The end
of the pressure equalization hose is always protected from deposits and condensation (IP65). The re-
maining distribution can be performed with a standard cable without a pressure equalization hose.
The terminal case should be mounted as close as possible to the medium surface whilst still outside the
medium to ensure the system is implemented cost-effectively and in the best possible way.
4.2.4 Pressure compensation filter for cable
The pressure compensation filter, part. no. 00382632, is a breathable filter that ensures aeration and
ventilation without moisture penetration. This is attached to the end of the special cable.
(1) Fastening hole