Chapter 3 ________________________________________________________________ Installation
JUMO __________________________________________________________________________ 49
Galvanic Isolation for Output
If galvanic isolation of the power supply line from the output signals
is needed, transmitter can be ordered with optional output isolation
module. This module prevents harmful grounding loops.
NOTE
Output isolation module is not needed when using the power supply
module.
0506-030
Figure 29
Galvanic Output Isolation Module
The following number refers to Figure 29:
1
=
Output isolation module
Third Analog Output
0503-030
Figure 30
Third Analog Output
The following numbers refer to Figure 30:
1
=
Flat cable pins
2
=
Screw terminals for signal line
3
=
DIP switches to select the output mode and range
