JUMO ATH-SE-2, Operating Manual

Page: 22 / 30

22
7 Technical data
7 Technical data
7.1 Control ranges and temperature probes
7.2 Capillary and temperature probe
Type Control/limit
value ranges max. admissible
excessive probe
temperature Length of the temperature probe
in mm
Copper (Cu) Stainless steel (CrNi)
°C °C Ø 6 Ø 8 Ø 6 Ø 8
ATH.-SE-2 0 to 100 125 107 75 99 67
20 to 90 125 138 91 130 83
30 to 110 135 125 84 117 76
20 to 120 140 107 75 99 67
60 to 140 165 123 83 117 76
20 to 150 175 88 65 80 57
50 to 200 230 101 72 93 64
50 to 250 290 - - 73 54
50 to 300 345 - - 63 49
ATH.-SE-20 30 to 110 135 112 78 104 70
ATH.-SE-70 60 to 140 165 110 77 102 68
20 to 150 175 80 61 72 53
50 to 250 290 - - 66 50
50 to 300 345 - - 58 -
Type Scale limit value Capillary Temperature probe
ATH.-SE-2 ≤ 200 °C Copper (Cu) Copper (Cu)
ATH.-SE-20 Ø 1.5 mm Material no. 2.0090
ATH.-SE-70 Material no. 2.0090 hard soldered
> 200 °C Copper (Cu) Stainless steel (CrNi)
Ø 1.5 mm Material no. 1.4571
Material no. 2.0090 hard soldered
all areas Stainless steel (CrNi) Stainless steel (CrNi)
Ø 1.5 mm Material no. 1.4571
welded
Capillary length 1000 mm, max. 2000 mm as standard
Min. bending radius of the capillary 5 mm