Jumbo Digi 101, User Manual

Page: 19 / 47

6
GB
Technical Specs and Assembly
Dimensions
Height (A)
Width (B)
Depth (C)
725 mm
720 mm
280 mm
2700 - 2850 W
10.0 - 10.5 A
IP 20
Class I
40 -50 W
220 - 240 V 50-60 Hz
Total Power (W)
Feed (V/Hz)
Drawing Current (A)
Protection degree
Device class
Vapor heather
Using your Heather
Plug your device’s plug into a suitable grounded socket.
Adjust the thermostat.Bring the on / off swich to the running position.
Thermostat operation :
One heating element runs independenty of the thermostat during
product operation as precaution. If you find the room temperature
to be low,increase the thermostat setting.
To finish the operating of your device,bring the thermostat to ‘min’
position and on- off buttons to ‘off position,nd unplug the device.
Attention! There is a safety system inside your device.In case of any
tipping over the safety system shall start and cut off electricity.
Assembling the stand
Place it as shown and lock.
Upper heating element in operation
Off
Vapor in operation
Fan in operation
Lower and upper heating
element in operation
3 Heating Element in Operation
4 Heating Element in Operation