Page 6
For technical questions, please call 1-888-866-5797.
Item 61959
Set Up Instructions (continued)
Battery Installation
1. Remove the battery compartment
cover from the back of Remote.
2. Install (2) AA 1batteries according
to indicated polarity.
3. Slide battery compartment cover
over batteries and snap into place.
Note:
Reprogramming may be required
after batteries have been replaced.
Direct Code Setting
1. Find the code(s) for the device and
brand to be programmed in the
Code Lists starting on page 10.
Note:
Many brands have more than one
code in the listings. It may be necessary to
repeat the following steps, trying multiple
codes until the code that works with the
Remote and selected device is found.
2. Manually turn on the device to be
programmed into the Remote.
3. Aim the Remote at the device and
press and hold the corresponding
Device Select Control button until
the LED Indicator Light turns on and
stays solid red. Release the button.
4. Enter the first 4-digit code from the Code
Lists using the number keys. The LED
will blink as each number is pushed.
Note:
Enter the code within 30 seconds
or the LED Indicator will flash twice and
the Remote will exit programming mode.
5. If the LED turns off after entering the
code, the Remote has recognized the
entry – go to the next step. If the LED
flashes, the code is not recognized.
Return to step 1 and repeat with the
next code from the Code Lists.
6. Press the ON/OFF button on the
Remote. If the device shuts off,
this may be the correct code. Test
other buttons on the Remote to
verify functionality. If the device
does not shut off, or if all of the
other buttons do not work correctly,
return to step 1 and repeat with the
next code from the Code Lists.
Note:
The Remote may recognize the
code but the device may not. It may
be necessary to try more than one
code to get the device to function.
7. If the correct code cannot be found from
the Code Lists or a particular brand
is not listed, use one of the alternate
methods under the headings that follow
to find the code with the Remote.
8. Use the Personal Code Reference
Chart at the back of this manual to
record codes for future reference.
Summary of Contents for 61959
Page 1: ......