JUMAR REG-03TFT, Instruction Of Installing And The Maintenance

Page: 19 / 35

JUMAR REG-03TFT
While activating the driver for the first time, the „ OFF ” mode is activated. Every next
time, its status is saved in the regulator's non-volatile memory. Activating the driver
again, automatically causes switching on of the lately used working mode.
In the picture, the way of moving between the particular driver's modes. In the „ ON ”
mode, the regulator steers the functions automatically and depends on the parameters
set by the user. In this mode the status of the flame is constantly monitored. The
decline of the flame activates functions linked to the ignition of the pellet (if the
particular burner's function requires it). The driver carries out three trials of ignition of
the pellet. The lack of flame may be caused by: the lack of the pellet in the container,
when the big feeder was not filled with the pellets, the flame's sensor is dirty or broken.
CAUTION!!
The flame's sensor should be cleared regularly. The smudge of dirt may be the reason of
false interpretation of the burner's status, causing for example, a higher fuel
consumption without full burning of the pellet.
- 19 -