Julian Bowen Limited Atlas Bunk Bed - Gloss White Assembly Instructions Manual Download Page 4

 S a f e t y   A d v i c e

Please take the time to carefully read through the whole of these instructions before
you commence.
Keep these instructions for future reference.
Unpack, inspect and check off all of the contents.
Please dispose of all packaging safely.
Small component parts could choke a child if swallowed.
We strongly recommend that you keep children well away from the work area.
It would be sensible to lay a sheet or blanket on the floor where you intend to work
to avoid scratching this product and to protect your floor.
This product is heavy. Take extreme care when lifting to avoid personal injury or 
damage to the product.
Assemble the product as close to its intended final position in the room as possible.
HANDY HINT: If you keep the hardware in a bowl during assembly you will be less 
likely to lose them.

04

Tighten firmly all the fittings when the assembly is complete.
The bed base is an integral and indissociable part of the bed.
WARNING: High beds and upper bed of bunk beds are not suitable for children
under six years due to the risk of injury through falls.
It is not safe to use this product if any part of the structure is missing or broken.
Children could strangle themselves with articles, such as ropes, strings, cords,harnesses
and belts attached to or hung on this product.
WARNING: Children can become trapped between the bed and the wall. To avoid risk
of serious injury the distance between the top safety barrier and the wall shall not
exceed 75mm or shall be more than 230mm.
The largest size of the mattress recommended is : 190 x 91 x 20cm.
The bed has been tested to ensure compliance with BS EN 747-1:2012 + A1:2015.

 I m p o r t a n t   I n f o r m a t i o n

1

5

5

c

m

201

.5cm

99c

m

ATLAS BUNK BED

Product Code - ATL001/ATL004

Distributed by:                

Julian Bowen Limited
Bentick House,
Park Lane Business Park,
Kirkby-in-Ashfield,
Notts, NG17 9LE

Factory ID: Manufactured in China
Date of Manufacture: Jun 2015

CERTIFICATION LABEL

This bunk bed model has 

been tested by an independent 
laboratory and is in compliance 

with EN 747-1:2012 +A1:2015

 - Standard Consumer Safety 

Specification For Bunk Beds

WARNING : This upper bed is not suitable for children under six years

Reviews: