Menu functions
38
Editing
PrgNr: Set the program you wish to create. 0 ... 5
SP :
Setpoint
TI :
Time [hh:mm] or
GRD:
Gradient [°/t] = [°/min]
Change type of program in MENU >configuration<,
menu item >Programmtyp/program type< .
ST:
Step 0 … 59
Press the
key if a parameter is to be retained. (prior to OK)
Level 2
Example:
Program (PrgNr.) 2 is to have a target temperature with a set
point (SW) of 100.00 °C in section t (ABS) 3.
Duration (ZI) 1 hour.
Select the program number.
•
Set the desired >PrgNr.< by pressing
and
.
Level 3
For the selected section >ST< a setpoint >SP< and the
duration >TI< or the gradient >GRD< are entered in the
right half of the input window.
or
Input window for >ST<, >SP< and >TI< / >GRD<
1.
Set the desired Step >ST < by pressing
and
.
2.
Set set point >SP< by using the numeric keypad and
confirm by pressing
.
3.
Set the time >TI< or a gradient >GRD< using the numeric
keypad and confirm by pressing
.
By confirming time or GRD the values on the left side of
the input window are moved.
•
The values for the next section are entered in the right half
of the input window.
See above
1. / 2. / 3.
