Julabo CORIO CP, Operating Manual, Page: 70 / 72

Appendix
70
11.3 Error messages in configuration process
If errors occur during a configuration process or during a firmware update, these
are shown on the display as error codes in ticker text.
Error code Description Solution
CFG error Error during configuration. •
Repeat the process.
•
Replace USB stick if this occurs again.
•
If the fault has not been remedied,
contact Technical Service.
ProG error Error during firmware update. •
Repeat the process.
•
Replace USB stick if this occurs again.
•
If the fault has not been remedied,
contact Technical Service.