EN
69
Special safety instructions
WARNING:
Keep your hands away from the cutting area and blade�
• When sawing always hold your right hand on the back handle and
your left hand on the front handle� If you hold the tool with both
hands, they cannot come into contact with blade�
• Do not put your hand under the workpiece� The guard does not
protect you from the blade under the workpiece�
• Adjust the sawing depth to the thickness of the workpiece�
Slightly less than one full tooth on the blade should be visible
below the workpiece�
• Never hold the workpiece in your hands or across your legs� Secure
the workpiece on a stable surface� It is important to support the
workpiece properly so that body contact is minimised, the blade
does not jam, and you do not lose control�
• Hold the power tool by the insulated grips when working in areas
where it may come into contact with concealed electrical cables or
its own power cord� Contact with a live cable will cause the metal
parts on the tool to also become live – risk of electric shock�
• Always use a fence or guide to obtain a straight cut when sawing�
This makes the cut more precise and reduces the risk of the blade
jamming�
• Always use blades with the correct size and shape of centre hole
(rhomboidal or round)� Blades that do not fit properly on the tool
will run eccentrically, which will reduce performance�
• Never use damaged or incorrect washers or screws for the blade�
Blade washers and screws are specially designed for the tool to
ensure optimum functionality and maximum safety�
