EN
28
Oscillation angle
3.2°
Sound pressure level, LpA 81.7 dB(A), K=3 dB(A)
Sound power level, LwA 92.8 dB(A), K=3 dB(A)
Vibration level
2.980 m/s², K=1.5 m/s²
Always wear ear protection.
The measurement values have been deter-
mined in accordance with EN 62841-2-4:2014.
The declared value for vibration and noise,
which has been measured by a standardised
test method, can be used to compare different
tools with each other and for a preliminary
assessment of exposure.
WARNING!
The actual vibration and noise level when
using power tools may differ from the
specified maximum value, depending on
how the tool is used and the material. It
is therefore necessary to determine which
safety precautions are required to protect
the user, based on an estimate of exposure
in actual operating conditions (taking into
account all stages of the work cycle, e.g. the
time when the tool is switched off and when
it is idling, in addition to the start-up time).
DESCRIPTION
The following are included in the packaging.
1. Clamping screw
2. Clamping ring
3. Power tool
4. Sandpaper
5. Sanding pad
6. Saw blade
7. Scraper
8. Hex key
FIG. 1
vibration. Vibrations from power tools
can cause personal injury. Stop working
immediately and seek medical attention if
you experience numbness, itching, tingling or
pain, or if your skin changes colour. Vibration
levels can deviate from the declared value,
depending on how the tool is used. The
following factors can influence the level of
vibrations:
• Incorrect/unsuitable use.
• Unsuitable accessories.
• Working with unsuitable materials.
• Inadequate maintenance.
Symbols
The following symbols provide guidance for
how to use your power tool. Make sure you
understand the symbols and their significance.
This product has a safety class
II rating. This means it is fitted
with extra or double insulation.
Approved in accordance with
the relevant EU directives.
Read the instructions.
Recycle as electrical waste.
TECHNICAL DATA
Rated voltage
230 V / 50 Hz
Rated output
220 W
Safety class
II
Weight
2.0 kg
Oscillation frequency
20000 /min
Summary of Contents for Meec tools 017401
Page 4: ...3 1 2 8 7 6 5 4 1 2 3 ...
