EN
31
USING AND MAINTAINING BATTERY-
POWERED TOOLS
• Charge the batteries only with the charger
recommended by the manufacturer. The
use of another charger can result in the
risk of personal injury and fire.
• Only use batteries intended for the power
tool. The use of other batteries can result
in the risk of personal injury and fire.
• Do not allow batteries to come into
contact with paper clips, coins, keys, nails,
screws and other small metal objects that
can result in short circuiting. Short
circuiting the battery terminals can result
in the risk of burn injuries or fire.
• Incorrect use can cause liquid to leak from
the battery. Avoid touching this. Rinse
with water after unintentional contact.
Seek medical attention if you get battery
fluid in your eyes. Leaking battery fluid can
cause skin irritation or burn injuries.
SERVICE
• The power tool must only be serviced by
qualified personnel using identical spare
parts. This will ensure that the power tool
remains safe to use.
• Never attempt to repair damaged
batteries. Batteries must only be serviced
by an authorised service centre or other
qualified personnel. (For battery
operation only).
ADDITIONAL SAFETY INSTRUCTIONS
• Hold the power tool by the insulated grips
when working in areas where the tool
may come into contact with concealed
electrical cables or its own power cord.
Contact with a live cable will cause the
metal parts on the tool to also become
live – risk of electric shock.
• Before starting work on walls, ceilings or
floors, check that there are no concealed
electrical cables or conduits. Use a live
The tool does the job better and safer
when used at the rate for which it was
designed.
• Do not use the tool if it cannot be
switched on and off with the power
switch. Power tools that cannot be
controlled with the power switch are
dangerous and must be repaired.
• Pull out the plug and/or remove the
battery before making any adjustments,
changing accessories or putting the power
tool away. These safety precautions
reduce the risk of accidently starting the
power tool.
• Store power tools out of the reach of
children when not in use. Never allow
children, or anyone who is unfamiliar with
the power tool and these instructions, to
use the tool. Power tools are dangerous if
used by inexperienced persons.
• Keep the power tool properly maintained.
Check that moving parts are properly
adjusted and do not jam, and that no
parts are incorrectly fitted or damaged.
Check for other factors that could affect
functionality. If the power tool is
damaged, it must be repaired before
being used again. Many accidents are
caused by poorly maintained power tools.
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to jam
and are easier to control.
• Use the power tool, accessories and bits
etc., in accordance with these instructions,
taking into account the actual working
conditions and the work that is to be
done. It can be dangerous to use power
tools for purposes other than those they
are intended to be used for.
• Keep handles and grips clean, dry and free
from oil and grease. Greasy handles and
grips make it difficult to hold the tool.
Summary of Contents for Meec tools 012179
Page 4: ...1 1 3 4 5 2 6...
Page 5: ...2 3 4 A A B B...
