EN
29
3. Fasten the weights bars (9) in the rear
crossbar (3). Screw on with hex screws
(17). Put the weights bar holder (73) on
the weights bars. Put the rubber shock
absorber (8) over the weights bar holder.
Put the weight pads (10), weight selector
(12), plastic stop (14), block (13), holder
(15), plastic washer (16) on the weights bar
(9). Insert the cotter (11).
FIG. 3
NOTE:
Before fitting the weight selector (12) put on
the plastic stop (14) to align the holes and then
put the block (13) in the hole in the weight
selector (12) and the plastic stop (14).
Step 2
1. Put the weights bar holder (76) on the
weights bars (9).
2. Fasten the top frame (19) in the main
frame (4) with hex screws (5), square
mounting plate (35), flat washers (6), and
nyloc nuts (7).
3. Fasten the top frame (19) in the weights
bars (9). Screw on with hex screws (17) and
flat washers (6).
4. Fasten the weight guard holder (76) in
the top frame (19) with the screws (75),
washers (26) and nuts (74).
5. Fasten the backrest (20) in the main frame
(4). Screw on with hex screws (21) and flat
washers (22).
FIG. 4
Step 3
1. Fasten the forward press base (28) in the
top frame (19) with hex screw (31), flat
washer (48), metal bushing (33) and nyloc
nut (32).
2. Connect the support (38) to the main
frame (4) with hex screws (5), flat washers
(6), nyloc nuts (7) and the holder for the
rear crossbar (67).
3. Fasten the eye screw (29) in the support
(38) with hex screw (25), flat washer (26)
and nyloc nut (30).
4. Fasten the eye screw (29) in the forward
press base (28) with the knob (27).
FIG. 5
Step 4
1. Fasten the seat bracket (40) in the main
frame (4) with hex screws (5), flat washers
(6), square mounting plate (34), and nyloc
nuts (7).
2. Fasten the seat (41) in the seat bracket (40)
with hex screws (21) and flat washers (22).
3. Fasten the upright (46) in the U-shaped base
on the seat bracket (40) with hex screw (42),
flat washers (6) and nyloc nut (7).
4. Fasten the rod for the foam roller (45) on
the seat bracket (40). Put on the foam
rollers (44).
5. Fasten the rod for the foam roller (45) in
the upright (46). Put on the foam rollers
(44).
FIG. 6
Step 5
1. Fasten the hand support (49L/R) in the
forward press base (28) with hex screws
(47), flat washers (48), metal bushings
(33) and nyloc nuts (32).
2. Cover the hand support (49L/R) with the
foam rollers (51).
3. Fasten the front press bar (52L/R) in the
hand support (49L/R) with hex screws (50),
flat washers (26) and nyloc nuts (30).
FIG. 7
