9
Assembly
Remove all the packaging materials. Check that all the parts are included.
NOTE:
Inspect the
product for any transit damage before assembling. We cannot be held liable for any damage on a
product after it has been assembled.
Assemble the product on a clean and level surface (e.g. carpet) to avoid damage. If the lugs on the
brackets become bent during assembly, use a flat screwdriver to bend them back.
Use a rubber mallet to avoid damaging the material.
Place the unit on a level surface. Otherwise this will compromise safety, or the maximum
supporting capacity.
Only use plugs and screws suitable for the type of wall and weight of the shelves. Plugs, screws
and tools for wall mounting are not supplied.
Subject to printing errors and design changes over which we have no control. In the event of problems,
please contact our service department.
www.jula.com