EN
13
read the operating instructions carefully before use!
Please retain for future reference.
InStALLAtIon
• Mount the key cabinet onto a stable wall. Use all four holes on the back panel. The screws should
be tightened sufficiently, without distorting the back plate. The flexible gasket on the back should
be used for all installations. Wall plugs should be used for masonry and brick walls.
• The key cabinet should be mounted in a discreet but accessible location for maximum protection
in an area with sufficient light to be able to read the dial. The key cabinet can be placed indoors
or outdoors.
oPerAtIon
Your key cabinet is factory preset to ”0-0-0-0”
Enter your new code here: ” _ _ _ _ ”
opening the cabinet
• Rotate the four dials to the correct combination, then pull the cabinet door downwards, towards
you.
Locking the cabinet
• Hang the key (or other object) you would like to store securely in the key cabinet, close the lid
and set the lock to a random combination to lock it.
resetting the combination lock
• Please read all instruction thoroughly before resetting combination. Memorise and record the
new combination above for future reference. Keep these instructions, with the code written in
them, in a secure place.
1.
Open the key cabinet using the secret number (the factory preset to “0-0-0-0”).
2.
Remove the rubber cover from the reset lever inside the cabinet. Then slide the reset pin to
the left and down as per arrow (lid should be opened towards you).
3.
Rotate the four dials on the front to your new secret combination. Ensure the numbers are
positioned centrally and have clicked into position.
4.
Slide the reset pin inside the box upwards and to the right this time – opposite to the
direction of the arrow.
5.
Close the lid. To lock the cabinet you must turn the four dials to a random combination.
Check the operation of the cabinet by opening it using the new combination.
Operating instructions for
key cabinet
ENGLISH