19
1.
Tensioner
2.
Adjusting nut
Tips
1.
Walk at a steady, brisk pace.
2.
Close the spreader before turning.
3.
Overlap each run by about 45 cm to avoid missing out any sections.
4.
Do not use the spreader when it is windy, as this will affect the results.
MAINTENANCE
1.
Empty the hopper when you have finished.
2.
Clean the machine with water and a mild detergent every time it has been used. Residual material
can damage or clog components and have an adverse effect on the functionality of the machine.
3.
Allow the machine to dry before putting it away. Store in a clean and dry place.
4.
The transmission is permanently lubricated and does not require any maintenance.
Jula reserves the right to make changes. In the event of problems, please contact our service department.
www.jula.com
