ENGLISH
5
ENGLI SH
Read these instructions carefully before use!
TECHNICAL DATA
Ranges
2.0
– 99.5 PSI and 0.15 – 7.00 bar
Character display
25 mm LCD
Power supply
3 V lithium, button cell battery
Operating temperature
0˚C – 40˚C
OPERATION
The correct tyre pressure
reduces tyre wear and extends tyre life
reduces fuel consumption
improves vehicle handling and safety
Features
PSI and bar settings
Ranges 2.0
–99.5 PSI and 0.15–7.00 bar
LCD display
Automatic shut-off, CE approved
1.
Press ON and select PSI or BAR setting.
2.
Place the pressure gauge nozzle over the valve on the tyre. Press firmly to prevent air escaping.
3.
Hold the gauge on the valve until the reading on the LCD display locks.
4.
Quickly remove the gauge from the valve and read off the pressure.
To retake the reading, place the nozzle on the valve again and repeat.
The gauge automatically shuts off 30 or 90 seconds after use.
It can also be switched off manually by holding the ON button down for more than 3 seconds.
NOTE:
To obtain the best seal, align the tyre air valve upwards or slightly to the side (at 6 or 7 o clock) so
that you can press the gauge straight down. This means you have to twist your head slightly to read the
result, but the most important thing is that you can press down the pressure gauge properly on the valve.
Subject to printing errors and design changes over which we have no control. In the event of problems,
please contact our service department.
www.jula.com
