ENGLISH
7
To change the time, repeat the above steps.
When the correct time has been set, plug the meter into a power outlet. Connect the product, whose
consumption you want to measure, to the meter. The meter now begins to measure the energy
consumption of the appliance.
Setting the price/kWh
To enter the setting menu, hold down FUNC for 5 seconds when voltage, current or power are displayed.
Setting Price 1
1.
Press SET and the first digit for price/kWh starts flashing. Press UP to set the value.
2.
Press SET and the second digit for price/kWh starts flashing. Press UP to set the value.
3.
Press SET and the third digit for price/kWh starts flashing. Press UP to set the value.
4.
Press SET and the fourth digit for price/kWh starts flashing. Press UP to set the value.
5.
Press SET again and the decimal value for price/kWh starts flashing. Press UP to set the value.
6.
Press SET and the day of the week starts flashing. Press UP to set the value.
7.
Press SET again and the mode for hours starts flashing. Press UP to set the hour.
8.
Press SET again and the mode for minutes starts flashing. Press UP to set the minute.
Setting Price 2
Press FUNC and release the button when the setting for Price 1 has been completed. Repeat the above
steps to set Price 2.
Stand-by mode
The display turns off after 10 seconds of inactivity. Press any key to start it again.
Subject to printing errors and design changes over which we have no control. In the event of problems,
please contact our service department.
www.jula.com