ENGLISH
6
MO, WE, FR
TU, TH, SA
MO, TU, WE
TH, FR, SA
MO, WE, FR, SU
Initial operation
1.
Plug the timer into a 230 Volts wall socket and turn the power on. Leave the timer plugged in for
about 14 hours to charge the memory backup battery.
2.
Delete all information in the memory by pressing the MASTER CLEAR button with a sharp object
such as a pen after charging.
3.
The timer is now ready to use.
Setting the current time
1.
Press CLOCK button and hold, simultaneously press WEEK button until the actual day is
displayed. Continue by pressing HOUR or MIN button until the current hour or minute is displayed.
When setting, the buttons WEEK, HOUR or MIN can be held down for rapid forward counting.
2.
Release both buttons. The week and time will be set.
3.
To reset incorrect time, repeat above steps.
Programming
TIP: Make sure that the time period settings do not overlap, especially when using the option for blocks of
days. If the settings overlap, the timer will turn on and off according to programmed time and not
according to the programme instruction’s number. OFF has priority over ON.
1.
Press TIMER button and release. LCD shows ON_1. The first ON setting can be made now.
2.
Press WEEK button to set the day or block of days. Set the time by pressing HOUR and MIN
button.
3.
Press TIMER button again to finish the first ON setting and enter into the first OFF setting. LCD
shows OFF_1. By repeating 2 to make the first OFF setting.
4.
Press TIMER button again to finish the first OFF setting and enter into the 2
nd
ON setting. Repeat 2
and 3 to program remaining settings. Press TIMER button and hold for 2 seconds to enter fast
advance.
5.
After completing settings, press CLOCK button. The timer is ready to operate.
EXAMPLE: Timer ON at 17:15 and OFF at 22:30 everyday
A.
Press TIMER once and release. LCD displays ON_1
B.
Press WEEK till LCD displays "MO,TU,WE,TH,FR,SA,SU"
C.
Press HOUR till LCD displays 5:00PM or 17:00
D.
Press MIN till LCD displays 5:15PM or 17:15
E.
Press TIMER again and release. LCD displays OFF_1
F.
Repeat the above b,c and d till LCD displays "MO,TU,WE,TH,FR,SA,SU",10:30PM or 22:30.
Manual ON/AUTO/MANUAL OFF setting
Operating modes cannot be changed during program settings.
1.
Press ON/AUTO/OFF button to revert the three modes in turn.
2.
The programs can only be executed in AUTO mode. When AUTO is selected, the timer operates
as the programs. In MANUAL ON or MANUAL OFF mode all programs are ignored and the timer
doesn't operate. When MANUAL ON mode is selected, power output is always ON. When
MANUAL OFF mode is selected, power output is permanently off.
3.
When the mode is turned from MANUAL ON to AUTO, the timer will keep the setting of MANUAL
ON until to the next timer setting.
