JUKI SC-956, Instruction Manual

Page: 98 / 185

– 93 –
6-2. Correcting the needle thread tension according to the remaining amount of thread
wound on the bobbin
3) Select the thread tension correction
method you want to use from the four
methods described below:
❹ Not use
❺ Sewing speed (initial setting)
❻ Bobbin thread remaining
amount
❼ Both (the sewing speed and
the bobbin thread remaining
amount)
Refer to "6-3. Tension correction (with
respect to sewing speed)"p.95 for
the sewing speed.
<Needle thread tension correction screen>
<Sewing data edit screen>
2) Press ❷ .
The "Needle thread tension correction
screen" is displayed.
<Sewing screen (Maintenance personnel mode)>
1) Press ❶ on the sewing screen
under the maintenance personnel
mode.
The "sewing data edit screen" is dis-
played.
The needle thread tension can be corrected according to the bobbin thread remaining amount.
The needle thread tension can also be set on the operation panel. The needle thread tension data is
stored in memory.
4) When you want to change the tension correction data (with respect to the bobbin thread remaining
amount), press ❽ .
* ❸ , the content you have entered is confirmed and the screen is returned to the "Sewing
data edit screen".
❸ ❽
❹ ❼ ❻ ❺
❶
❷