JUKI MO-80CB Instruction Manual Download Page 2

Do not dispose of electrical appliances as unsorted municipal waste. Use 
separate collection facilities.

Contact your local government for information regarding the collection systems 
available.

If electrical appliances are disposed of in landfills or dumps, hazardous 
substances can leak into the groundwater and get into the food chain, 
damaging your health and well-being.

Thank you for your purchase of this Combination Overlock, Chain Stitch and Cover Stitch 

Sewing Machine. This machine, that is intended for household use will provide you with 

excellent performance in sewing from light to heavy material (lawn to denim).

Please refer to this Instruction 

Manual

 for proper use and optimum service. To get the most 

out of your sewing machine, read the entire Instruction 

Manual

 before attempting to operate 

the machine. Then familiarize yourself with the machine by following the Instruction Manual 

page by page.

To ensure that you are always provided with the most modern sewing capabilities, the 

manufacturer reserves the right to change the appearance, design or accessories of this 

sewing machine when considered necessary without notification or obligation. 

After you have read the Instruction Manual, please be sure to keep it together with the 
warranty so that you can read it whenever necessary.

1

PREFACE

RECYCLING

Summary of Contents for MO-80CB






























































































Reviews: