Adjustments and settings
Settings, practical sewing
Roll hemming
• Turn the handwheel towards you until the needles are fully raised.
• For roll hemming, pull the selection lever to the front marking on the stitch
plate, furthest from the presser foot (C).
• For overlocking, push the selection lever to the rear marking on the stitch
plate, nearest to the presser foot (D).
The roll hemmer is fully integrated in the machine. The edge of the fabric
will be automatically rolled over, producing a very narrow, fine seam or hem.
Roll hemming is ideal for finishing edges on all fine fabrics, such as evening
clothes, lingerie, scarves, frills and also for curtains and napkins.
The presser foot pressure is factory adjusted to a medium setting. Should you
wish to adjust it, simply turn the knob in the direction desired:
Presser foot pressure
The presser foot pressure is factory adjusted to a medium setting.
Should you wish to adjust it, simply turn the knob in the direction desired:
Position of knob for normal pressure (M) = Medium.
More pressure: for thick or stiff fabrics such as denim, tweed, firm linen (H) =
High.
Less pressure: for light-weight or sheer fabrics and knits (L) = Low.
C
D
17
