– 19 –
11-2. Procedure for checking the solution viewer
1. Place the thread and material you want to use in the sewing process on the sewing machine.
2. Raise the main body of the sewing machine and turn ON the power to the sewing machine. Then, press
the ready key (needle bar stop position button
) .
3. Set the sewing pattern and the number of revolutions to those you wan to use in the sewing process.
4. Turn ON the solution viewer.
5. Carry out sewing.
6. Check the value of the solution viewer.
* If the value does not fall within the specification value range, carry out setting or adjustment of the
solution viewer again. Then, carry out the steps of procedure from the aforementioned step 5. (Refer
to
"11-1. Specification values and handling method" p.18.
)
7. Turn OFF the solution viewer.
11-3. How to turn ON and OFF the solution viewer
1. Keep the "MODE" and "L/D" held pressed simultaneously for three seconds or more.
* The solution viewer is turned OFF by keeping the "MODE" and "L/D" held pressed simultaneously for
three seconds or more again.
* When the solution viewer is in the ON state, "SoLU on" is displayed. When it is in the OFF state,
"SoLU oFF" is displayed.