– 2 –
3. INSTALLING THE BELT COVER AND THE BELT
(Installation procedure)
1) Remove belt cover A
❶
.
2) Pass the 14P connector which puts cables to-
gether and the air tube through the slotted hole
in the table.
3) Put the V-belt on the sewing machine pulley.
4) Adjust the belt tension.
5) Pass synchronizer support shaft
❷
and washer
❸
through mounting hole in belt cover A
❶
and
fix the synchronizer support shaft with washer
❸
and nut
❹
.
6) Mount belt cover A
❶
.
7) Install belt cover B
❺
on the table.
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest.
❶
❺
Slotted hole in
the table
V-belt
❶
❸
❷
❸❹
❶
Be sure to use the sewing machine with
safety devices
❶
and
❺
installed.
