JUKI LK-1900B/IP-420, Instruction Manual

Page: 117 / 144

– 113 –
30. SETTING APPROVAL/DISAPPROVAL OF CALLING OF PATTERN DATA
Calling of the wrong pattern by mistake is prevented by making the calling of the unnecessary pattern
impossible. In addition, calling and using the necessary pattern can be performed.
① Display the standard pattern selection screen.
When key is pressed, STANDARD
PATTERN SELECTION button A is
displayed. When this button is pressed, the
standard pattern selection screen is displayed.
② Setting approval/disapproval of calling
The standard patterns which have been
registered are displayed on the standard pattern
selection screen. When UP/DOWN SCROLL
button
B
is pressed, the page is
changed over.
Every time STANDARD PATTERN button
C
is pressed, the normal state and the reverse
state alternate with each other. In case of the
normal state, reading is disapproved and in case
of the reverse state, reading is approved.
However, in case of the standard pattern which
has been already used, changeover from the
reverse state to the normal state is not possible.
: Reading disapproved (normal state)
: Reading approved (reverse state)
③ Determining approval/disapproval of calling
When ENTER button D is pressed, setting
of approval/disapproval is determined.
D
B
A
C