Height and inclination of the
feed dog can be adjusted
The feed method can be changed
over between the needle-feed
and the bottom-feed
Upgraded maintainability
Both the height and inclination of the
feed dog are easily adjustable. Adjust
the feed dog according to sewing
conditions such as the specification,
process, and material to be sewn.
Through a simple adjustment of the
machine and replacement of the gauge, the
feed method can be changed over between
the needle-feed and bottom-feed types.
When the bottom-feed method is selected,
the needle entry position can be adjusted
(in the feeding direction) using the needle-
feed/bottom-feed change-over mechanism.
This allows the machine to flexibly adapt to
commercially available gauges.
●
When replacing the gauge, the screw
in the hook-driving shaft saddle can be
tightened diagonally from above to
ensure safety and operability.
●
The hook is lubricated automatically
when adjusting the oil discharge. This
helps stabilize and regulate amount of
oil in the hook more effectively.
■
WHEN YOU PLACE ORDERS
Please note when placing orders, that the model name should be written as follows:
●
To order, please contact your nearest JUKI distributor.
Needle
gauge
mm
3.2
4.8
6.4
7.1
7.9
Feed
Needle-feed
Bottom-feed
✽
inch
1/8
3/16
1/4
9/32
5/16
B
D
F
G
H
Code
Code
Code
1
P
4
✽
Attachment
Combination availability table
C
Automatic reverse
feed function
Automatic reverse
feed function
SC-910
SC-800
Standard throat plate, standard slide plate,
standard presser foot
Pedal switch type
(AK89)
✽
Not provided
Provided
Code
A
B
00
0B
Hook
Latch hook
Hook with
non-rotational
bobbin
Throat plate for tape-attachment, slide plate for tape-
attachment, presser foot for tape-attachment
Code
0
Motor
✽
Compatible with clutch motor
(without synchronizer and
resistor pack)
1
Compatible with SC-800 and EC-10B
(with built-in synchronizer and
resistor pack)
Code
S
Auto-lifter
Not provided
Motor
0
(Not provided)
B
(Provided)
Cluth motor
EC-10B
Where "0" is selected
Where "1" is selected
Where "0" is selected
Where "1" is selected
○
×
×
×
×
○
×
○
×
○
×
○
Code
Z
✽
For the "Bottom-
feed: B," only the
needle gauges B,
D, and F are
applicable.
✽
For the above category 4, select the feed category A (needle-feed).
✽
For the AK-89, select the
motor compatibility category 1
(SC-910, SC-800 or EC-10B).
✽
Refer to the combination availability table.
✽
Refer to the combination
availability table.
LH3126F
Adjustment of the
feed dog inclination
Adjustment of the
feed dog height
Hook oil
regulating screw
Needle-feed
Bottom-feed
■
SPECIFICATIONS
■
OPTIONS
■
WHEN YOU PLACE ORDERS
■
SPECIFICATIONS
■
OPTIONS
●
Micro-lifter
Part No.: 236-11056
This device can be installed on
the back of the face plate. It is
very convenient for frequent
use.
●
Automatic reverse feed kit
Part No.: 226-56854
The automatic reverse feed
function device can be moun-
ted on the machine after the
setup. This device can be in-
stalled on the back of the face
plate. It is very convenient for
frequent use.
●
Tension-free feeder
(tape feeder) V059
Part No.: MAV-059000AA
The amount of tape to be fed
can be adjusted in accordance
with the sewing speed of the
machine. It is adaptable to
processes for attaching rein-
forcement tape, attaching elas-
tic tape or lace to foundation.
●
Tape cutter AT-36
The tape cutter is able to cut
the tape just behind the press-
er foot (20mm away from the
needle entry point).
The cutter pressure is adjust-
able according to the material
thickness.
Max. sewing speed
Max. stitch length
Thread take-up
Needle bar stroke
Lift of the presser foot
Hook (selectable)
Needle
(at the time of delivery)
Feed system
Lubrication
Distance from
needle to machine arm
Bed size
Weight of the machine
head
3,000rpm
4mm (normal / reverse feed)
Slide type
33.4mm
By hand : 5.5mm / By knee : 12mm
Vertical-axis hook (regular fold)
Specific latch hook or specific hook with non-rotational bobbin
DP
×
5 (#10) #9
〜
#11
Change-over between needle-feed / bottom-feed
Fully automatic lubrication system by means of plunger pump
245mm
517mm
×
178mm
43kg
Adjustment of the
feed dog inclination
Adjustment of the
feed dog height
Hook oil
regulating screw
Needle-feed
Bottom-feed
■
WHEN YOU PLACE ORDERS
■
SPECIFICATIONS
■
OPTIONS
