– 2 –
5
6
3
4
1) Refer to
, and call
the function setting No. 95.
2) The type of machine head can be selected by
pressing
switch
5
(
switch
6
).
* Refer to the
"MACHINE HEAd LIST"
on the
separate sheet or the Instruction Manual for the
machine head of your sewing machine for the
type of the machine head.
3) After selecting the type of machine head, by
pressing
switch
3
(
switch
4
), the
step proceeds to 96 or 94, and the display auto-
matically changes to the contents of the setting
corresponding with the type of machine head.
4. SETTING pROCEdURE Of THE MACHINE HEAd
1
Precautions to be taken when handling USB devices
• Do not leave the USB device or USB cable connected to the USB port while the sewing machine is in opera-
tion. The machine vibration can damage the port section resulting in loss of data stored on the USB device or
breakage of the USB device or sewing machine.
• Do not insert/remove a USB device during reading/writing a program or sewing data.
It may cause data breakage or malfunction.
• When the storage space of a USB device is partitioned, only one partition is accessible.
• Some type of the USB device may not be properly recognized by this sewing machine.
• JUKI does not compensate for loss of data stored on the USB device caused by using it with this sewing machine.
2
USB specifications
• Conform to USB 1.1 standard
• Format supported _____FAT 32
• Consumption current ___The rated consumption current of the applicable USB devices is 500 mA at the maximum.
3. USB pORT
