Home
/
JUKI
/
IP-420
/
Instruction Manual

JUKI IP-420, Instruction Manual, Page: 113 / 139

Share

Page: 113 / 139

JUKI IP-420 Instruction Manual Download Page 113

– 109 –

Current needle poston can be moved before and after n the unt of element.

1

Select the element forward.

Select and execute ELEMENT FORWARD (functon code 130)

n the code lst screen,

and the element moves to the last poston of the element ncludng the current needle poston. In
case of the last poston, the element moves to the last poston of the next element.

2

Select the element backward.

Select and execute ELEMENT BACKWARD (functon code 131)

n the code lst screen,

the element moves to the top poston of the element ncludng the current needle poston. In case
of the top poston, the element moves to the top poston of the prevous element.

Moving between the respective elements is performed linearly. When there is any
obstacle on the way, interference occurs. So, be careful.

15. ELEMENT FORWARD/BACKWARD (130 and 131)

«
...
111
112
113
114
115
...
»

Summary of Contents for IP-420












































































































































Reviews:

No comments