- 1 9 -
- 1 9 -
- 1 9 -
- 1 9 -
- 1 9 -
5-1-16 Adjusting the position of the BH switch
Remove the face cover.
1. Attach the BH foot and lower the presser foot.
2. Lower the buttonholing.
3. Select BH ( ) with the pattern selector button.
4. Loosen setscrews (5) and (6) in the BH switch base.
5. Move the switch base and adjust so that the clearance with the asterisk
mark * is 0.2 to 0.4 mm.
6. Put a sheet of paper under the BH presser, perform idle stitching without
threading and check the return position and the stopping position of BH.
Perform re-adjustment if there is any trouble.
If these tests are OK, perform threading and sewing test of BH.
How to adjust
0.2 to 0.4 mm
(6)
(5)
*
Summary of Contents for HZL-E61
Page 1: ...SERVICE MANUAL HZL E61 COMPUTER SEWING MACHINE ...
Page 2: ......
