JUKI dsu-142, Instruction Manual

Page: 38 / 56

– 2 –
2. INSTALLING THE THREAD STAND
Assemble the thread stand device. Fit it in the hole in the table.
Tighten locknut
❶ so that the thread stand does not fluctuate.
❶
1. SETTING UP THE SEWING MACHINE
1) When carrying the sewing machine, be sure to carry by two
people.
(Caution) Do not hold the pulley.
2) Do not place a protruding object, such as a screw driver, at
a place where the sewing machine is to be installed.
3) Setting the sewing machine
Holding countersunk screw
❶
, washer
❷
and nut
❸
sup-
plied with the unit, fix the sewing machine on the table with
aligned with rubber packing ❹ at four locations.
4) Securely attach head support rod to the table until it goes
no further.
❸
❷
❹
❶
❹
140401