●
Presser foot
●
Automatic reverse feed
function
With its wider area under the arm
(300mm), the machine permits easy
handling of the sewing material for
improved operability.
The machine has a pushbutton-type
reverse feed switch. The automatic
reverse feed switch can be re-positioned
to best match the operator.
The maximum lift of the presser foot
is increased to 15mm. By using the
higher-lift of the presser foot in
combination with the machine's
needle-up stopping feature, easier
placement of a heavyweight material
on the machine is ensured.
●
Distance from needle to
machine arm 300mm
●
Bobbin thread winder
Installation of an attachment-mounting
seat improves operability when
replacing the attachment and increases
the durability of the machine bed
surface.
●
Attachment-mounting seat
The hinge has been moved 10cm from
behind the needle entry point. Thanks
to the improvement in the hinge's
location, the material will no longer be
caught by the hinge, thus contributing
to upgraded workability.
●
Hinge
The lubricating hole is located
on the arm. This allows female
operator to carry out the oiling
process without tiling the
machine head.
●
Lubricating hole
The machine is equipped as standard
with a micro-lifter. It works to constantly
float the presser foot above an elastic
material or other difficult-to-sew ones,
thereby helping effectively reduce
material slippage as well as damages
made by the presser foot on the
material.
●
Micro-lifter
300mm
15mm
Precise control of the thread trimming
timing is now enabled. As a result, the
thread trimming speed is increased
1.5 times or more while maintaining the
high reliability of the conventional type of
thread trimmer.
●
Automatic thread trimmer
mechanism
The DLN-9010A is installed with the latest
compact servomotor which has also been
adopted in the DDL-9000B in the direct-drive
system, in which the servomotor is directly
connected to the main shaft.
●
The latest compact-size servomotor
DLN
-9010A
It has inherited the advanced features of the DDL-9000 Series,
such as the direct-drive system, semi-long arm and elimination of the
oil pan. In addition, it comes with a highly reliable needle feed mechanism.
This is a needle-feed type DDL-9000 Series
sewing machine, that has been highly applauded
as the top-of-the-line lockstitch machine
with a thread trimmer.
The needle feed mechanism, which is widely recognized as offering outstanding efficiency of
feed and effectively preventing uneven material feed, responds to a wide range of applications
such as the sewing of outerwear, runstitching of men's shirts, etc. and the attaching of various
parts to garment bodies.
Thanks to the adoption of the most advanced compact AC servomotor, which has been utilized
in the DDL-9000B, as well as employing the new model control box SC-920A, the DLN-9010A
achieves a substantial labor-saving equivalent to that of the DDL-9000B.
The thread trimming speed is increased 1.5 times or more as compared with the conventional
model, as the thread trimming timing can now be precisely controlled.
The machine is provided with various easy-to-operate
functions for increased operability.
The bobbin thread winder is built-in
at the top surface of the machine
head. The built-in bobbin winder
ensures easy replacement of the
bobbin thread. The bobbin winder
also incorporates a thread cutting
knife for cutting the thread after the
completion of bobbin winding, as
well as a bobbin thread quantity
adjusting function.
