– 34 –
1
Display the sewing screen.
Dsplay the data nput screen (blue) and press READY key
A
. Then the back-lght of LCD changes to green and
sewng s possble. When the work clamp s n ts upper pos-
tion, the work clamp first comes down to its lower position and
then moves to the sewng start pont.
Be careful not to get your fingers caught between the
work clamp and the throat plate.
4
Proceed stitching with the presser lowered.
The sewng shape s dsplayed at the center of the screen. The
current pont, sewng start poston and sewng end poston
are respectvely represented by (pnk crcle), (blue dot) and
(pnk dot).
Check the sewng shape usng ONE-STITCH BACKWARD
button
C
and ONE-STITCH FORWARD button
D
. When two or more commands have been entered, the feed
poston does not change but the command dsplay
A
s moved
forward and backward. When you keep pressng the ONE-
STITCH FORWARD or BACKWARD button, the movng speed
ncreases.
When the COMMAND SEARCH FORWARD button
E
s pressed, the feed automatcally moves to the sewng end
poston. When the COMMAND SEARCH BACKWARD button
F
s pressed, the feed automatcally moves to the sew-
ng start poston.
To stop the feed, press button
C
,
D
,
E
,
F
,
G
or
H
.
When INTERMEDIATE PRESSER button
G
s pressed,
the ntermedate presser s rased or lowered. (Ths button s
not dsplayed when MEMORY swtch U103 s set at 0 (zero).)
5
Finish checking the shape.
When PRESSER INITIAL POSITION button
H
s
pressed, the work clamp moves to the sewng start poston
and the screen s restored to the sewng screen. When CAN-
CEL button
I
s pressed, the screen s also restored to the
sewng screen. When the work clamp does not rest at the sew-
ng start or end poston, sewng can be started by depressng
the foot swtch before sewng shape checkng s not completed.
The sewing machine does not start even when the foot
switch is depressed with this mode.
2
Display the step sewing screen.
When STEP SEWING button
B
s pressed, the step
sewng screen s dsplayed.
3
Lower the presser with the foot switch.
WARNING :
Make sure without fail of the contour of the sewing pattern after selection of the sewing pattern.
If the sewing pattern extends outside the work clamp feet, the needle will interfere with the work
clamp.
2-7. Checking pattern shape
A
B
I
A
C
H
D
G
E
F