− 77 −
2-15. Method of changing memory switch data
A
1
C
2
4
B
1
!1
E
D
F
!0
!1
1
Set the mode to input mode.
When the back-lght of LCD dsplay
1
shows the
nput mode n blue color, t s possble to change
the memory swtch data. When the back-lght
shows the sewng mode n green color, press
READY key
2
to change over to the nput
mode.
2
Call memory switch data edit screen.
Press MODE key
4
, and memory swtch
data (level 1) edt screen
A
s dsplayed.
Further hold pressng the key for 3 seconds,
and memory swtch data (level 2) edt screen
B
s dsplayed.
3
Select memory switch data to change.
Press ITEM SELECTION key
!0
and
select the data tem whch you desre to change.
4
Change data.
There are one data tem to change the numer-
cal value and the other data tem to select the
pctograph n the memory swtch data.
No.
C
such as
s attached to the data
tem to change the numercal value. Set value
D
can be changed by ncreasng/decreasng the
value wth DATA CHANGE key
!1
.
No.
E
such as
s attached to the data
tem to select the pctograph. Pctograph
F
can
be selected wth DATA CHANGE key
!1
.
/
For the detals of memory swtch data, refer to
-2-16. Memory switch data list" p.78
level 1
level 2
