Adjusting the bicycle for riding comfort
1. Adjusting the seat height
Pull the seat clamp lever outward to loosen the seat post. Adjust the seat
the desired height. The maximum height should not extend beyond
minimum extension mark marked on the seat post. Tighten the seat
clamp and close the lever to lock in the seat’s height.
2. Adjusting the seat tilt and distance
Using a 6 mm Hex wrench, loosen the bolt under the seat. Adjust the
seat tilt and seat distance forward or backward. Tighten the bolt securely
to lock in your desired position.
3. Adjusting the stem height
Use a 6mm Hex wrench to loosen the stem. Move the stem up or down
to the desired height. The maximum height should not extend beyond
minimum extension mark marked on the stem. Check to be sure the
handlebars are pointing in the same direction as the wheels. Re-tighten
the bolt to lock in the stem’s position.
4. Adjusting the handlebar tilt angle
Use a a 5 mm Hex wrench to loosen the two screws near the center of
the handlebars. Tilt the handlebars to the desired position. Re-tighten the
screws securely to lock in the handlebars. Be sure both screws are
tightened equally.
Juiced Riders | ODK U500 V2 | User Manual
13