22
23
JBP-RCS-MANUAL |
©
2021 JUICED BIKES
JBP-RCS-MANUAL |
©
2021 JUICED BIKES
TURNING THE E-BIKE ON AND OFF
Fig. 22 - Power Button
HOW TO TURN THE E-BIKE ON
Securely install the battery pack and press the power button.
Then, push and hold the power button on the back of the LCD
for 3 seconds when the bike is off. The LCD will illuminate and
the bike will power up.
HOW TO TURN THE E-BIKE OFF
Push and hold the power button for 3 seconds when the bike is
on. The LCD display will power down and the bike will shut off.
Then press the power button on the battery pack.
AUTOMATIC SHUTOFF
The electronic system will also automatically shut down after a
preset period of time. This duration can be adjusted in the
setup menu.
ADJUSTING THE ASSIST LEVELS
HOW TO INCREASE THE ASSIST LEVELS
When the bike is on, push and release the “assist up” button.
The assist will advance by one level until SPORT mode is
reached.
HOW TO DECREASE THE ASSIST LEVELS
To decrease the assist level, push and release the “assist down”
button. The assist will decrease by one level until ECO mode is
reached.
The default assist setting is assist level 1. This will appear each
time the e-bike is turned off and back on.
ACTIVATING THE LED HEADLIGHT AND DISPLAY
BACKLIGHT
Fig. 23 - Headlight Graphic on the Main Display
OPERATION
TO TURN ON THE LED LIGHT
Push and hold the “assist up” button for 2 seconds. The front
LED headlight and the display’s backlight will illuminate. A
headlight status icon will appear on the screen.
TO TURN OFF THE LED LIGHT
Push and hold the “assist up” button for 2 seconds and the LED
headlight will turn off.
ACTIVATING THE WALK MODE
When pushing the bike uphill, use the WALK mode. This mode
will turn the motor at walking speed to assist you in moving the
bike.
TO ACTIVATE THE WALK MODE
To activate the WALK mode, push and hold the “assist down”
button. After 2 seconds the motor will begin to turn at
walking speed.
TO STOP USING THE WALK MODE
To stop using the WALK mode, release the “assist down” button.
The motor will stop turning and resume normal operation. Using
either brake lever will also stop the WALK mode.
ACTIVATING THE CRUISE CONTROL FUNCTION
Use the cruise control feature to maintain a desired speed
without using the throttle or pedal assist.
TO ACTIVATE THE CRUISE CONTROL FUNCTION
Use the throttle or pedal assist to reach your desired speed.
Push and hold the “assist down” button for 2 seconds. When the
“C” graphic appears, release the “assist down” button and the
current speed will be maintained without the need to pedal or
use the throttle. In CRUISE mode, the throttle is automatically
modulated so that the desired speed is maintained.
To discontinue the use of the cruise control function, choose
one of the following actions:
1.
Use the brakes by squeezing the brake lever
2.
Use the throttle
3.
Push the “assist up” or “assist down” button
IMPORTANT NOTES ABOUT THE CRUISE CONTROL FUNCTION
•
The cruise is considered a type of throttle and the
maximum cruise controllable speed is 20 mph in
accordance with regulations.
•
If you set the cruise control speed above 20 mph, the
cruise control speed will default to 20 mph. The speed will
decrease until it reaches 20 mph.
•
The pedal assist is still available when the cruise control
is active. It may be possible to pedal the e-bike faster
than the preset cruise speed. However, the cruise will
automatically resume if the speed decreases to the preset
cruise-controlled speed.
•
If you need more power to achieve a preset speed (for
example, when encountering resistance such as a hill or
headwind) more power will automatically go to the motor
to help maintain the preset speed.
•
If the resistance is too much for the system to retain the
preset speed, the resulting speed will be limited by the
OPERATION
