14
15
JBP-RCST-MANUAL |
©
2021 JUICED BIKES
JBP-RCST-MANUAL |
©
2021 JUICED BIKES
INSTALLING THE PEDALS
NOTICE
It’s critical that the pedals are tightened firmly in the crank arm to prevent the pedals
from loosening while riding, which will result in significant damage to the bike.
1.
Identify the left and right markings on the pedals. Be sure
to install the pedals on their respective side.
•
“L” is for the left pedal and is installed on the left crank arm.
•
“R” is for the right pedal and is installed on the right crank
arm (chain side).
Fig. 13 - Left and Right Identification Marks
NOTE:
Both pedals tighten toward the front of the e-bike.
2.
While keeping the pedal horizontal, carefully hand-start the
threads of the pedal into the crank arm.
INSTALLING THE HANDLEBARS
1.
Point the headset towards the front of the bike.
2.
Center the handlebar in the headset, taking care not to
damage any wires.
3.
Install the clamp and screws. Alternately tighten the screw
side-to-side until secure.
4.
Verify that the front tire lines up with the headset.
5.
Verify that all headset items are tight.
Fig. 12 - Installing the Handlebars
3.
Finish tightening the pedals using the supplied 15 mm
wrench. The pedals must be very tight. Check and retighten
the pedals after your first two rides.
Fig. 14 - Installing Petals
ASSEMBLY
ASSEMBLY
