INTERNAL PROTECTION COMPONENTS
The JG8 Series products have a Basic Level of AC power protection consisting of fast acting
metal oxide varistors between hot, neutral and ground. The JGJr also features a line capacitor
between hot and neutral to reduce hig h frequency line noise and AC line surges.
TROUBLE SHOOTING
The JG8 is well designed and constructed. Every JG8 is submitted to a full functional test be-
fore being shipped by Juice Goose. It requires neither maintenance nor adjustment. It is un-
likely to malfunction. However, there are potential events to note:
The JG8 will not come on or turns itself off.
a. Check the status of the power supplied to the unit. Use a voltage meter and/or
polarity tester to examine the status of incoming power.
b. Check that the circuit breaker is not tripped and that the current load on the unit
does not exceed its rated 15 amp capacity. If the breaker is tripped, remove sufficient current
load to reduce the total to no more than 15 amps, wait approximately 30 seconds after the trip-
ping. Turn the power switch/circuit breaker back on.
One or both lights will not come on (JG8.0L and JG8.0LM).
– Unplug power to the JG8. Un-
screw the cap on the end of the tube(s). Remove the bulb(s) in question. Take care. If the
bulb is broken use a cloth or needle nose pliers to remove the component. The replacement
bulb is a 7 watt, candelabra base (e.g. night light bulb).
If an observed problem can not be remedied, particularly if the problem seems severe or dan-
gerous, discontinue use of the JG8 and contact Juice Goose directly.
REPAIR
Should your product need service contact Juice Goose for assistance and authorization to
return the unit. PLEASE NOTE: a return authorization number is required in order for the
service personnel to correctly and promptly identify, repair and return your unit.
You may obtain a Return Authorization Number by calling: 713-772-1404 or sending email to
[email protected].
JG 8 Series Owners Manua...
page 3
Monday, June 21, 2004 11:22
