START
PRECAUTIONS
1. Turn your drone and turn off the switch you will find at the
bottom right (“ON”).
2. Turn on the control by pressing the on / off.
The control will sound 3 beeps and the red LED will light up
will, getting flashing.
3. Push the power lever to the maximum and then lower it to
the bottom position.
The control will sound a long beep, which is a sign that the
control and the drone are synchronized.
Your VR Drone Power + is ready to fly.
4. Auto takeoff and auto landing:
The VR Drone Power + includes the option to take off and
land with just one button. Once synchronized (up to step 3),
press the START / STOP button and the drone takes off flight
alone. Thus the control is activated high, which allows the
drone manage and maintain a fixed flying height automati-
cally.
Press the button again to land the drone smoothly and
easily.
1 When the control of the LED remains lit, but the drone LED flashes slowly, it is a sign that
the synchronization was not properly executed. Turn off the control and the drone, and rerun
the “start-up” from the beginning.
2. If, when you start to fly, the drone does not remain stably, land it, then turn off the control
and the drone and re-synchronize it, paying particular attention whether the drone is placed
on a flat, horizontal surface relative to ground.
3. When the drone LED blinks slowly, it means that the battery is running out. Land the drone
and put the battery charging with the USB charger provided.
ADVICE:
When you synchronize your VR Drone Power +, ensure that it is on a flat, horizontal
surface, so that the flight will be stable.
Switched on/
Off
ON/OFF
Take-off/
Landing
