Operation
1701429 • 2018/12
JUDO JSY-LF-AT
13
more frequent backwashing is necessary.
Temporarily set a shorter time interval!
4.2.2 Setting the backwashing
interval
A cleaning interval of 1 month is set ex-
works.
Selectable time intervals:
2
Months
1
Month
1
Week
1
Day
Fig. 4:
Unplug and open cover
ELECTRO_NO_HEADER
Risk of electric shock!
Disconnect the power supply unit
from the socket.
1.
Pull the power supply unit out of the
socket.
2.
Remove the cover of the automatic unit
by pressing and pulling on the side.
3.
Select the desired time interval for the
time-controlled automatic backwashing
process on the control electronics of the
automatic system. To do this, attach the
cable lug of the short cable strand to the
pin with the inscription corresponding to
the desired time interval (see Figure 5).
A
B
C
D
Fig. 5:
Time control
A
2 months
B
1 month
C
1 week
D
1 day
4.
Refit the cover of the automatic unit until
it audibly engages.
CAUTION
Escaping water!
Before connecting to the power
supply system, make sure that the
waste water connection is func-
tional.
5.
Plug the power supply unit back into the
socket.
Backwashing starts immedi-
ately!
After the backwashing process, the set-
ting of the new backwashing interval is
completed.
Fig. 6:
Close cover and insert plug