10
JUDO EASY FILT-BP
Operation
5.2
Pressure setting
Change the factory-set pressure of 4 bar:
–
Undo the locking screw (
1
) at the
handwheel of the pressure reducer (
2
).
Turn the handwheel in a clockwise
direction = increase pressure.
Turn the handwheel in an anti-clockwise
direction = reduce pressure.
The pressure can be set within the range
1.5 - 6 bar, depending on the inlet pressure.
–
Briefly open an extraction point behind
the domestic water station, this relieves
the pressure and the set pressure can
be read off.
–
As soon as the required setting range is
reached retighten the locking screw on
the pressure reducer handwheel.
Fixing the locking screw of the pressure
reducer handwheel prevents the setting
range from changing by itself.
5.3
Functional description
The unfiltered water flows through the built-
in rotary flange (
4
) into the domestic water
station. The water flows through the fine
filter from the outside inwards. The filtered
dirt is retained by the mesh of the fine filter
screen. The retained dirt can be seen from
the outside through the transparent filter
bowl (
6
). The filter water flows on into the
pressure reducer (
2
). The downstream pres-
sure set can be read off at the manometer
(
3
). The filtered water then leaves the
domestic water station through the built-in
rotary flange (
4
).
1
Locking screw (countersunk screw)
2
Pressure reducer handwheel
3
Downstream manometer
4
Built-in rotary flange
5
Sieve
6
Filter bowl
7
Suction pipe
8
Flushing valve
9
Backwashing handwheel
Fig. 5: Functional description
1
2
3
5
6
7
8
9
4