Remote control and Remote transmission of messages
5
Remote control and
Remote transmission of
messages
ELECTRO_NO_HEADER
The device may only be installed
by qualified technical personnel.
The power supply unit must be dis-
connected to make the electrical
installation.
The leakage protection system offers the
following options:
•
Connection with building control sys-
tems for forwarding of status or fault
5.1
External messages
The device has a potential-free output via
which leakage protection messages and
fault messages can be transmitted poten-
tial-free to a peripheral device.
5.2
Integration in building control
systems
The leakage protection system can be inte-
grated into a building control system (e.g.
EIB / KNX, LCN or LON) via the floating sig-
nal relay.
The potential-free relay is connected to a
binary bus coupler.
In this way, fault messages can be for-
warded to the building control system.
24
JUDO JPCS
1703593 • 2022/10
