Operation
INFO_NO_HEADER
The default sleep mode time of
6 h can be changed in hour steps
to another value in the range 1 to
10 h.
After the sleep mode time has
elapsed, limit value monitoring
starts again and the default sta-
tus display appears.
The
Menu
key is deactivated in
sleep mode.
Cancel sleep mode:
Press
OK
key.
Normal limit value monitoring starts
again. The default status display
appears.
4.3.4 Activation of vacation mode
During longer absences, the limit values
for water withdrawal can be reduced or the
water supply can be completely shut off.
There are two possibilities:
•
immediate manual activation
•
automatic activation after approx.
72 hours without water flow
INFO_NO_HEADER
Vacation mode remains active until
key
OK
is pressed (the vacation
mode message then disappears).
Key
Menu
is deactivated during vaca-
tion mode.
I. Immediate activation of vacation mode
(manual)
1.
Press
Menu
key.
2.
Select
Vacation mode
using the arrow
keys and confirm with the
OK
key. The
following appears on the display:
Vacation mode
Start <OK>
3.
Press
OK
to confirm.
Vacation mode is activated. The fol-
lowing appears on the display in an
alternating manner (with a yellow back-
ground):
Leakage protect.
in vacation mode
To end
press <OK>
II. Setting vacation mode automatic acti-
vation
There are four different settings for
automatic activation:
°
off (no automatic activation of vaca-
tion mode)
°
U1 (= limit values 500 L/h • 50 L •
5 min)
°
U2 (= limit values 1000 L/h •
100 L • 10 min)
°
U3 (= shut-off valve closed - no
water flow)
1.
Press
Menu
key.
2.
Navigate to
Setting
using the arrow
keys and confirm with the
OK
key.
3.
Navigate to
Leakage protection
using
the arrow keys and confirm with the
OK
key.
4.
Navigate to
Vacation mode Leakage
protection
using the arrow keys and
16
JUDO JPCS
1703593 • 2022/10
