Blender with Glass Jug
Self Clean Function
•
Once you have emptied the contents, simply add 1L of water and a small
amount of liquid detergent and follow the “Use” & “Removing processed food”
instructions.
Periodic Cleaning
•
Unscrew the Cutter Blade Assembly from the Jug by unscrewing clockwise.
•
Thoroughly wash the Jug , Lid and Cutter Blade Assembly using warm
soapy water.
•
Detachable parts / / / are also dishwasher safe.
•
Motor Body is wipe clean only, using a damp, soapy cloth.
Storage
•
Reassemble the appliance and store with Lid ajar in a safe place.
•
Keep ingredient pieces roughly the
same size when possible, this makes
uniform blending easier. Cubes
approx. 2.5cm / 1” are ideal.
•
It is usually best to put liquid
ingredients into the Jug first.
•
The appliance can complete a task
in seconds - stop and check the
consistency every few seconds rather
than over blend.
•
Most chopping tasks are best
performed by using the pulse control.
•
Do not overload the motor with
extra heavy or extra large loads.
If the blender has been overfilled,
disconnect from mains electricity
supply and remove some of the
ingredients before continuing.
•
If you run the motor continuously for
3 minutes, wait at least 5 minutes
before running the motor again.
Tips
•
Use a plastic spatula to scrape-down
any pieces of food that stick to the
inside of the Jug : Ensure the
machine is disconnected from mains
electricity supply before placing
utensils or fingers into the jug.
•
The maximum temperature of liquid
foods that can be processed is 80°C.
It is better to allow soups, broths
etc to cool to a lower temperature if
possible.
•
If processing hot liquids the maximum
capacity is reduced to 1L
•
At least one cup of liquid must be
added to Ice Cubes before they will
blend properly.
•
The Judge Blender is versatile but
it isn’t a replacement for all other
kitchen gadgets: it will not mash
potatoes, whisk egg whites, chop
raw meat, knead or mix stiff doughs
or extract juices from fruit and
vegetables.
